 Scooter-Lift II
The Scooter-Lift II can raise and store a fully assembled
scooter or wheelchair through the driver's or passenger's
side sliding door of minivans, and passenger side doors of
full size vans.
The Scooter-Lift II requires very little arm strength, balance
or effort to use. It is so compact that even in a minivan,
there is still enough room for three passengers to sit comfortably
in the rear seat. With scooter removed, or when traveling
without the scooter, entry and exit is easy since the door
opening remains unobstructed.
Bruno's Scooter-Lift II also features an optional installation
assembly that eliminates drilling any holes in the floor
of the vehicle. This means easier removal when it comes time
to transfer the lift in and out of a minivan. Contact Bruno's
Technical Applications Department about specific applications
for this system.
The Scooter-Lift II can be used for either three-or four-wheel
scooters and manual folding or power wheelchairs weighing
up to 200 lbs. (91k). The Scooter-Lift II's hand-held controller
makes this lift simple and easy to use. The Scooter-Lift
II uses electrical power from the vehicle's battery and all
lift operations are automatic. You only need to help guide
the scooter or wheelchair into place.
Expert installation and complete after-sale service is provided
by Bruno's nationwide and international network of dealers. 
|
|
